Transform your wheels with Simoniz Wheel paint. This leading wheel paint provides a high quality finish that’s compatible with original colours from the leading manufacturers.
With its exceptional durability and resistance to chips and scratches, Simoniz Wheel Paint provides reliable protection against corrosion, stone chips, and road debris. Whether you’re driving on the highway or hitting the track, trust Simoniz to keep your wheels looking their best, mile after mile.
Give your wheels a new lease of life and well-deserved revamp with Simoniz Wheel paint
Preparation: Remove wheel or trim from the vehicle. Clean area to be treated, of any dirt, brake dust, tar, rust, grease etc. Mask off areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes and frequently during use. Ideal application temperature of 21 °C/71 °F. Wheel Silver should not be applied to surfaces treated with alkyd-based paints. Test spray Test spray a small inconspicuous area before use to assess compatibility.
Keeping the wheel or trim upright, hold the can approximately 25-30 cm away from the surface and apply thin even coats. When the coat is touch dry, further coats may be applied.
After use, invert the can and depress the muzzle for several seconds to clear.
Use Simoniz Clear Lacquer for a high gloss finish. Apply this over the final coat.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.
With its exceptional durability and resistance to chips and scratches, Simoniz Wheel Paint provides reliable protection against corrosion, stone chips, and road debris. Whether you’re driving on the highway or hitting the track, trust Simoniz to keep your wheels looking their best, mile after mile.
Give your wheels a new lease of life and well-deserved revamp with Simoniz Wheel paint
Preparation: Remove wheel or trim from the vehicle. Clean area to be treated, of any dirt, brake dust, tar, rust, grease etc. Mask off areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes and frequently during use. Ideal application temperature of 21 °C/71 °F. Wheel Silver should not be applied to surfaces treated with alkyd-based paints. Test spray Test spray a small inconspicuous area before use to assess compatibility.
Keeping the wheel or trim upright, hold the can approximately 25-30 cm away from the surface and apply thin even coats. When the coat is touch dry, further coats may be applied.
After use, invert the can and depress the muzzle for several seconds to clear.
Use Simoniz Clear Lacquer for a high gloss finish. Apply this over the final coat.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.