Spray Paint – Primer
Spray Paint – Primer
Simoniz High Build Primer is easy to use and covers light scratches and imperfections, giving you a perfectly smooth base on which to paint.
- Masks imperfections
- Provides strong surface adhesion
- Creates a smooth base layer and prevents rust
At Simoniz, we want your car to look its best from top to bottom. We know that a beautifully painted exterior starts with a beautifully smooth surface.
Scratches and other surface imperfections can ruin the appearance of your car’s finish and should be filled before you apply primer.
Simoniz High Build Primer is easy to use and covers light scratches and imperfections, giving you a perfectly smooth base on which to paint.
For best results use after sanding the area, and use Simoniz Colour Restorer Polish after painting to create a flawless finish.
- Masks imperfections
- Provides strong surface adhesion
- Creates a smooth base layer and prevents rust
Name: Simoniz High Build Primer 500ml
Manufacturer’s Code: SIMB90D
Name: Simoniz Grey Plastic Primer 500ml
Manufacturer’s Code: SIMP08D
Name: Simoniz Etch Primer 500ml
Manufacturer’s Code: SIMP09D
Name: Simoniz Zinc Primer 500ml
Manufacturer’s Code: SIMP10D
How to Use:
Preparation: Clean area to be treated, of any dirt, rust, grease etc. Use wet and dry abrasive paper to prepare the surface. Mask off areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes. Ideal application temperature is 21 °C/71 °F. Primer should not be applied to surfaces treated with alkyd based paints. Test spray a small inconspicuous area before use. Hold the can approximately 25-30 cm away from the surface and apply thin even coats. Leave 10-15 minute intervals between coats.
Allow primers and topcoats 2-3 hours to dry before overpainting.
After use, invert the can and press the nozzle for several seconds.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.
At Simoniz, we want your car to look its best from top to bottom. We know that a beautifully painted exterior starts with a beautifully smooth surface.
Scratches and other surface imperfections can ruin the appearance of your car’s finish and should be filled before you apply primer.
Simoniz High Build Primer is easy to use and covers light scratches and imperfections, giving you a perfectly smooth base on which to paint.
For best results use after sanding the area, and use Simoniz Colour Restorer Polish after painting to create a flawless finish.
- Masks imperfections
- Provides strong surface adhesion
- Creates a smooth base layer and prevents rust
Name: Simoniz High Build Primer 500ml
Manufacturer’s Code: SIMB90D
Name: Simoniz Grey Plastic Primer 500ml
Manufacturer’s Code: SIMP08D
Name: Simoniz Etch Primer 500ml
Manufacturer’s Code: SIMP09D
Name: Simoniz Zinc Primer 500ml
Manufacturer’s Code: SIMP10D
How to Use:
Preparation: Clean area to be treated, of any dirt, rust, grease etc. Use wet and dry abrasive paper to prepare the surface. Mask off areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes. Ideal application temperature is 21 °C/71 °F. Primer should not be applied to surfaces treated with alkyd based paints. Test spray a small inconspicuous area before use. Hold the can approximately 25-30 cm away from the surface and apply thin even coats. Leave 10-15 minute intervals between coats.
Allow primers and topcoats 2-3 hours to dry before overpainting.
After use, invert the can and press the nozzle for several seconds.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.
