Simoniz Coloured Spray Paints are acrylic paints that help you to achieve a professional finish on a range of surfaces.
Simoniz Coloured Spray Paints are durable so they can be used on cars, including wheels and bodywork, and on other surfaces which need a tough finish such as scaffolding and BBQs. Use with Simoniz primers and lacquers for professional results.
Simoniz Colour Coats are fast drying and easy to use. They are available in standard RAL (European colour matching system) colours:
How to Use:
Preparation: Clean the area to be treated, of any dirt, grease, rust etc. Mask off any areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes. Ideal application temperature is 21 °C/71 °F. Simoniz paints should not be applied to surfaces treated with alkyd based paints. Test spray a small inconspicuous area before use. Hold the can approximately 25-30 cm away from the surface and apply thin even coats. Leave 10-15 minute intervals between coats.
Allow primers and topcoats 2-3 hours to dry before overpainting.
After use, invert the can and press the nozzle for several seconds.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.
Simoniz Coloured Spray Paints are durable so they can be used on cars, including wheels and bodywork, and on other surfaces which need a tough finish such as scaffolding and BBQs. Use with Simoniz primers and lacquers for professional results.
Simoniz Colour Coats are fast drying and easy to use. They are available in standard RAL (European colour matching system) colours:
How to Use:
Preparation: Clean the area to be treated, of any dirt, grease, rust etc. Mask off any areas which do not require treatment.
Directions: Shake can vigorously for 2 minutes. Ideal application temperature is 21 °C/71 °F. Simoniz paints should not be applied to surfaces treated with alkyd based paints. Test spray a small inconspicuous area before use. Hold the can approximately 25-30 cm away from the surface and apply thin even coats. Leave 10-15 minute intervals between coats.
Allow primers and topcoats 2-3 hours to dry before overpainting.
After use, invert the can and press the nozzle for several seconds.
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Prestone’s website.